Stone Effect
Authentic natural stone effect coatings without the weight or cost of real stone. Lightweight, seamless application for walls, columns, and feature elements. Multiple stone styles.
Application Visual
Real project appearance
What makes this coating system stand out?
- Realistic stone texture and color variation
- Lightweight —no structural reinforcement needed
- Cost-effective vs. natural stone installation
- Seamless application —no grout lines
What are the technical specs?
Color & Texture Options
Stone Effect 鈥?surface variations
More color and finish options available. Request color card.
Application Process
From surface preparation to final protection
Substrate Treatment
Remove dust, oil, and loose material. Repair cracks and holes with anti-crack mortar. Ensure the wall is solid, flat, dry, and below 10% moisture content.
Use a moisture meter 鈥?below 10% is essential for stone paint.
Putty Leveling
Apply two coats of anti-crack putty. Apply the second coat perpendicular to the first for better coverage. Sand smooth after drying.
Multiple thin coats are stronger than one thick coat.
Fiberglass Mesh Embedding
Embed fiberglass mesh into the second putty layer to prevent cracking. Use a level to mark horizontal/vertical grid lines (40-120 cm spacing) and apply masking tape along them.
Press tape edges firmly to prevent seepage.
Alkali-Resistant Primer
Roll or spray one even coat of alkali-resistant primer. This prevents alkali migration and improves adhesion. Ensure full coverage without drips.
Alkali-resistant primer is critical for exterior longevity.
Stone Paint Spraying
Spray in two passes: first a light coverage coat, then (after drying) a full build coat for rich grain and uniform color. Adjust air pressure and nozzle distance based on desired particle effect.
Adjust nozzle pressure to control particle size and texture.
Tape Removal & Touch-Up
When the stone paint is surface-dry (1-2 hrs), peel off masking tape quickly along the grid lines to prevent rough edges. Inspect corners and touch up missed spots.
Don't wait too long 鈥?dry paint tears when tape is removed.
Topcoat Sealer
After the stone paint fully cures (24-48 hrs), apply two coats of clear topcoat sealer. This creates a protective film for water resistance, stain resistance, and UV protection.
Two thin sealer coats outperform one thick coat.
Steps may vary depending on substrate conditions, indoor/outdoor location, ambient temperature, and the specific decorative effect desired. This guide is for reference only. Always refer to the full technical datasheet for your specific product.
Sourcing Support
Sample Available
Request a physical sample to evaluate color, texture, and quality before ordering.
OEM Supported
Custom formulation, your branding, your packaging. We adapt to your product line.
Export Packaging Ready
Standard export packaging with proper labeling and documentation for international shipping.
